Friday, March 29, 2013

Another simple elastic waist skirt!

Remember my post about how I make a simple elastic waist skirt? I decided I wanted to make the same skirt but with three fabrics instead of two so I'm back again with yet another easy tutorial. This one is just as simple with only two measurements, one simple math problem, and straight lines to sew. Don't worry, you can do it!




You will need ...

waist band fabric, 3/8 yard 

main fabric, for most this will be 5/8 yard or less depending on the desired length (for a 15" length I was able to use exactly 1/2 yard)
contrast fabric, 1/2 yard 
measuring tape 
scissors 
rotary cutter and cutting mat (don't worry if you don't have them, it just makes things easier)
thread
7/8 inch elastic although I often use 1/2 inch if that's what I have on hand
iron, sewing machine, you know, the typical stuff if you want to sew




You will need two measurements. The child's waist and the desired length. If you're unsure about what the length should be try measuring something in her closet that is the length you're looking for. My daughter is a skinny little thing and has a 23 1/2" waist and although she has grown a lot I only want her skirt to be about 15" long. She likes to pull her skirts down on her hips so if I make it longer it will be past her knees. I've spent a lot of time over the last year pulling her skirts up only to have her pull them back down. Now it's time to just sew them the way that works for us both.


Now, the simple math. 


Waist Band Fabric

Cut 2 pieces the width of the waist x 5 1/4" long. This will ultimately yield a waist band that is approximately 3 1/4" wide. For me, I will cut 2 pieces that are each 23 1/2" x 5 1/4".

If you are making a skirt for a waist 20" or smaller you can cut 1 piece on the fold.

Main fabric

Here is that one math problem I mentioned. Prepare yourself. Subtract 6" from your overall desired length. For me that will be 9" (15 minus 6). We will call this your adjusted length. That wasn't so bad was it?

Cut 2 pieces the width of the waist and the adjusted length. Again for me, that will be 2 pieces that are each 23 1/2" x 9".


Remember, if you are making a skirt for a waist 20" or smaller just cut 1 piece on the fold. 

Contrast fabric

Cut 2 pieces the width of the waist x 7 3/4" long. This will ultimately yield a contrast band that is approximately 3 1/2" wide. This means I will have 2 pieces, each 23 1/2" x 7 3/4".

And still, if you are making a skirt for a waist 20" or smaller you can cut 1 piece on the fold.

That's it for the cutting and the math. At this point you should have 6 pieces (3 for 20" waist or smaller). Now it's time to sew a few straight lines. For all seams the allowance is 3/8". 




Waist fabric 
With right sides together sew each side seam. I prefer to overcast mine when I am finished since I don't have a serger. If you are working with a smaller waist and cut 1 piece on the fold you only have 1 side seam to sew.

Main fabric  
With rights sides together sew each side seam. Overcast or serge if desired. If you are working with a smaller waist you only have 1 side seam here too.

Contrast fabric
With right sides together sew each side seam. Do NOT overcast or serge these seams. They will need to lie flat in a few minutes. If you are working with a smaller waist you still only have 1 side seam here as well.




Notice that the contrast fabric is not overcast but the main and waist fabrics are.
Still working with the contrast fabric that you didn't serge or overcast, press the seams open. Fold and iron the contrast fabric in half, right sides out, to create the contrast band. This is why we didn't serge or overcast the seams on the contrast. They are now tucked away neatly within the band.




Now you should have 3 tubes with only the contrast band folded in half. 




So far we have worked from the top down. Now I like to work from the bottom up. 

Next we are going to attach the contrast band to the main fabric.

Begin by pinning the contrast band to the bottom on the main band, right sides together starting with matching the side seams. If you are using directional fabrics be sure to check and make sure they are going to be facing the right direction before you sew. Once you've checked go ahead and sew the two fabrics together. I prefer to overcast here as well. 





Next, iron open with the inseam up. On the right side, using the seam as a guide, sew along to tack the inseam up. If you wanted to add ric rac this is a great place to do so. 




Now it's time to attach the waist fabric to the main fabric.

Begin by pinning the waist fabric to the main fabric right sides together. It's a good idea to check directional fabric here also. Now sew and if you prefer overcast the seam here as well. 




Next, iron open with the inseam down this time. This is a personal preference for me. If you want to iron the inseam pointing up here you certainly can. My little princess can some times get fussy over tags and things on her skin so I iron it down in hopes that it is less likely to rub her the wrong way. On the right side, using the seam as a guide again, sew along to tack the inseam whichever direction you prefer. The picture shows me sewing it with the inseam down.




The only thing left to do is create the casing for the waist and insert the elastic. You'll be finished in no time.

When creating a casing I always like to overcast the raw edge before I start. I don't know why. I'm sure I saw it or read it somewhere. You don't have to. I doubt anything would really happen if you didn't but I do.




Next, I press under approximately 3/8" of the raw edge and then another 1 1/4" to create the casing. 







Sew close to the lower edge of the casing leaving an opening to insert the elastic. 









Using a safety pin (because that's how my mom taught me) I then insert the elastic through the casing. I typically start with my waist measurement plus 1" for the elastic length. Once the elastic is through I pin the elastic ends together (maybe this is why I start with a safety pin) and try the skirt on. Of course the elastic always needs to be adjusted but that is simple. After adjusting the fit I sew the elastic together, distribute the fullness, and stitch the opening close (which I forgot to take a picture of).






I also make a habit of stitching in the ditch on the side seams to try to keep the elastic from shifting or twisting.




Now the only thing, and I do mean only thing, left to do is admire your work. You're finished! You made a super cute skirt using three different fabrics and hopefully had a little fun.









A few housekeeping items ...

The fabrics used are from Windham Fabrics Cabana Blooms collection and I purchased it from my favorite fabric shop, Material Girls Quilt Boutique in La Plata, Maryland.

The applique design used on the shirt is actually the frame from my Scalloped Bunny design. I skipped the bunny steps and merged in a capital H from 8 Claws and a Paw's Candi font. 

The shirt is from ARB Blanks. This was the first time that I used their shirts. They ship unbelievably quickly and the shirts are a very nice quality. I do think they have a trim, feminine fit (the girls at least) which is fine as long as you are paying attention to the size chart when ordering. 

I did make the headband from a combination of patterns and tutorials. I'll work on a tutorial for that another day so check back soon.

Thanks for reading!

Blessings,
Bridgette

Monday, February 11, 2013

Sewing with Friends

I have a sewing buddy! You know the kind. Trips to the fabric store together. Fun days sitting side by side talking over the hum of our machines. The pride of shared finished projects. A sewing buddy. 

A few months ago (okay, the first day of school) we made a trip to our favorite fabric store. There was no surprise when this resulted in a wonderful day together and a few more things in our baskets than planned. Oh well. A great fabric store will do that to the best of us. 




One of the things that she left with was Izzy & Ivy Designs' Stella dress and skirt pattern. My friend really wanted to tackle it and I agreed to help if needed. When she showed the pattern to her daughter the decision to sew it was confirmed and the fabric choices were made too. Her daughter wanted it to look just like the pattern using Riley Blake's Sugar & Spice fabrics. Thankfully I was already familiar with the line so I began locating the fabrics and we decided we would make it together. 



Together almost turned into forever. Each week we would try to find time to sew together and each week life would get in the way. Some weeks our schedules just couldn't line up. Often when they did we had other "Mom" issues to tackle that cut into our sewing time. And some days when we were supposed to be sewing we just talked. (Those are some of my favorites.) But, we did get it done and her and I, as well as our daughters, are very pleased with the finished products.  



Unfortunately this doesn't have the happiest of endings. My sewing buddy is moving across the country in just a few weeks and this was the last of our projects together ... kinda. I'm positive we'll be working on projects side by side via skype as soon as she is settled. That's just how great she is!













Friday, November 30, 2012

Christmas Card Display

I'll admit it. I'm not so good at this blogging thing. I have ideas all the time but I don't do a very good job of sitting down and writing them. Occasionally though I do get around to it and this is one of those moments. Of course having my husband pick up a movie on the way home for him and the kids to watch certainly helps.

Did you see my post for displaying children's artwork? Even nearly two years later it still gets used daily and worked so well that I decided to do the same thing for hanging our Christmas cards. All you need are simple cafe rods, command strips and curtain rings. I did spray paint my cafe rods black first (go ahead use your shocked face) and used the command strips instead of the hanging hardware so they weren't permanent and didn't leave any marks on the walls. After that it's as simple as sticking the command strips up, putting the rings on the rods and hanging them. Once your cards start rolling in you just clip them on the hooks. It really is that easy. 




By the way, if you're looking at the cards in the picture and you happen to be my number one follower and notice your card from a few years ago just know that we keep all of our cards from years passed with our decorations and this is the stack that I pulled out to use for demonstration. It did bring quite the smile to my face to see how young the boys looked just a few years ago. 

Thursday, August 30, 2012

How I Make a Simple Elastic Waist Skirt with a Scalloped Edge


Have you seen my simple elastic waist skirt tutorial? Ready to try something slightly different? This tutorial will show you how to make a simple skirt with a scalloped edge. Don't worry if you think you're reading the same instructions as my other skirt tutorial. I copied and pasted a lot of it because they are a lot alike.

You will need ...
main fabric, 1 yard or less depending on the size
contrast fabric, 1/2 yard or less depending on the size
measuring tape 
scissors (pinking shears will be helpful too)
rotary cutter and cutting mat (don't worry if you don't have them, it just makes things easier)
thread
7/8 inch elastic although I often use 1/2 inch if that's what I have on hand
iron, sewing machine, you know, the typical stuff if you want to sew
a marking pen or chalk
a compass or something for drawing semi circles (I used my big Pyrex measuring bowl ... really!)

First, you will want to measure the waist of your child and decide what finished length you like. Right now my daughter is 6 years old. She has a 22" waist and I like her skirts to be about 14" long. 

Now, some simple math.

Main Fabric Subtract 1/2" from your desired length. For me that will be 13 1/2" (14 minus 1/2). We will call this your adjusted length.

Cut 2 pieces the width of the waist and the adjusted length. Again for me, that will be 22 x 13 1/2.

If you are working with a waist 20" or smaller just cut one piece on the fold.

Contrast Fabric

Cut 2 pieces the width of the waist x 7" long. This will ultimately yield a contrast band that is approximately 3 inches wide. 

Again, if you are making a skirt for a waist 20" or smaller you can cut 1 piece on the fold.



Now it's time to sew a few straight lines. For all seams the allowance is 3/8". 

Main fabric
With right sides together sew each side seam. I prefer to overcast mine when I am finished since I don't have a serger. If you are working with a smaller waist and previously cut 1 piece on the fold you only have 1 side seam to sew.


Contrast fabric
With right sides together sew each side seam. Do NOT overcast or serge these seams. They will need to lie flat in a few minutes. If you are working with a smaller waist you only have 1 side seam here too.


Press the seams open. Fold and iron the contrast fabric in half, right sides together. This is where we will work on the scallops. 



Now it's time to make a few marks so we can begin to draw the scallops. Using a straight edge and a marking pen or chalk mark a horizontal line along the middle of the band, adjusting the band to extend your mark completely around.


It's time for a little more math but nothing too complicated. I think it's harder for me to explain. Take the width of your original fabric pieces and double it. The width should be the waist measurement which for me was 22 so double that is 44. This is the combined length of the two pieces before seam allowances. Now, subtract 1 1/2 for the seam allowances. That leaves me with 42 1/2. Basically I'm trying to calculate how much "band" I have to divide into scallops. Now divide that number by 10. For me that is 42.5/10=4.25. This means that each of my 10 scallops should be 4 1/4 inches wide. I was very lucky and ended up with an easy measurement. Depending on the width of your waist you may not be. It's okay though. The skirt has a gathered waist so it is forgiving. Your scallops don't have to be perfectly even so do your best and be happy. Now, starting at a seam, measure and mark the width of your scallops along your horizontal line. You should have width marks to allow for 5 scallops on each side.

Mark your scallop width along the horizontal line.
Now that you have your marks you need the scallops. This is where the compass or other round item comes into place. I used my big Pyrex measuring bowl. Hey I said it was an easy pattern, not sophisticated. My bowl had a diameter of just about 4 1/4 inches so it was perfect for me and yes, I was standing in my kitchen with my measuring tape checking bowls and plates for something that was close enough.

Starting at the side seam place your round object between two marks. Be sure that it is almost at the fold of your fabric but not quite and trace the lower half. Repeat this step for each of the 10 scallops adjusting where you need. When you are finished you should have 10 scallops drawn on your fabric, 5 on each side.
  



See how the scallops come almost to the fold but not quite? That's what you're aiming for.
After you have drawn all of the scallops it's time to stitch them. Simply stitch over the lines that you've drawn being sure to lift your presser foot to turn at each point and really whenever you need to help your fabric around. This isn't a difficult stitch but you do need to be patient to be sure that you are staying on your marks reasonably well and that you're guiding the fabric around. If you try to go to fast you will end up with jagged scallops. Just take your time and work your way around.




Okay, you're getting there. No more math, no more curves to sew, just some trimming and ironing then putting the pieces together.

Now that your scallops are sewn you need to trim the excess fabric away. I prefer to use my pinking shears for this because it helps when it's time to turn the fabric out. Whether you use pinking shears or not be patient and trim reasonably close to the stitches. You'll want to make sure to cut away all of the folded edge at the bottom of your scallops. The points will need a little extra trimming to help them lie flat when they are turned. Be sure to trim away as much as possible on the side seams and cut a small slit as close to the point as possible for each one. After the trimming is done turn the scallops out and start ironing. I use the tip of a child's paint brush to push the fabric out. If you have points that aren't turning well you may need to go back and trim more fabric away. I had a few that I had to go back on and trim more away. 






You're in the home stretch. Now, pin the contrast band to the main band, right sides together, starting with matching the side seams. Sew, serge or overcast.


Next, iron open with the seam up. On the right side, using the seam as a guide, sew along to tack the seam up. If you wanted to add ric rac this is a great place to do so. 


In order to keep a straight line I keep the side of the foot lined up to the seam. 
The only thing left is to create the elastic casing and insert the elastic.

When creating a casing I always like to overcast the raw edge before I start. I don't know why. I'm sure I saw it or read it somewhere. You don't have to. I doubt anything would really happen if you didn't but I do.

Next, I press under approximately 3/8" of the raw edge and then another 1 1/4" to create the casing. Sew close to the lower edge of the casing leaving an opening to insert the elastic.







Using a safety pin (because that's how my mom taught me) I then insert the elastic through the casing. I typically start with my waist measurement plus 1" for the length. Once the elastic is through I pin the elastic ends together (maybe this is why I start with a safety pin) and try the skirt on. Of course the elastic always needs to be adjusted but that is simple. After adjusting the fit I sew the elastic together, distribute the fullness, and stitch the opening close. I also make a habit of stitching in the ditch on the side seams to try to keep the elastic from shifting or twisting.





Guess what's next. Nothing! You're finished. The only thing to do now is make another one now that you have the hang of it.

Truthfully I have rewritten the "scallop" directions at least 5 times. It is so much easier to just show someone than it is to put it in writing. If you have a question or a better way of saying something please feel free to comment. 

For those of you who applique here is a free design. This little bird is one of my very first designs. I actually used some of the same fabric as this skirt to test it more than a year ago. You can find the rest of my designs on my website as well as a 30% off Labor Day sale through 09/03/12. 

Cheers,
Bridgette

Friday, July 6, 2012

Dollar Store Travel Games




There is nothing that can scare a mom quite like the thought of a 2 week, 9 state, 3,000+ miles road trip with 3 kids.  All that time in the car. All those snacks. All of the "are we there yets". What is a mom to do? Get the hot glue gun out of course.

I used games and a puzzle from the dollar store, some magnets, a magnetic dry erase board and a few other items to make 2 games and a puzzle that were worthy of being passed around in a car and brought a little bit of entertainment between several state lines.

It was easy! Here's how I did it ...

I bought a checkers game and snakes and ladders game at the dollar store along with a 48 piece puzzle. 





Using magnets that I already had (you can find them at Michaels) I hot glued round magnets to the bottom of all of the game pieces. I used a magnet roll (also available at Michaels) and put strips on the back of the game boards making sure not to cover the creases where the board folds for storage. I also used the magnet roll to cut small pieces to put on the backs of all of the puzzle pieces. I did try to keep the magnets as close to the middle as possible for the puzzle pieces. 






Fortunately for me I already had a magnetic dry erase board that was the perfect size. If you don't have one in the house you can pick one up at Wal-Mart or Target for around $6. 

If you've read my blog before you won't be surprised to know that I kept each game and its pieces in a ziploc bag. Talk about a space saver. 




Since I didn't want the dice for snakes and ladders rolling all over the place in the car I put them in a clear plastic bowl with a lid. I used a recycled bowl from a yogurt treat but you can use anything as long as it's clear on the top or bottom so you can see the dice. I also used two dice instead of one. Sometimes snakes and ladders can go on endlessly. With two dice it seems to go a little faster. I prefer to play 2 or 3 short games rather than 1 endless game.



Of course we had other forms of entertainment for the car as well as for our many destinations. I'm not a big "movie in the car" mom so that wasn't one of them. We did have lots of books including early reader books for our 6 year old. I'm happy to say that she reached a new milestone in her reading ability and began reading silently to herself. Hooray for summer reading! We also had packs of pipe cleaners that I picked up from the dollar store, stickers and paper, a new coloring book and box of crayons for each girl, fun pads, cheap cookie sheets for each girl to use as a writing tray (they're great because things can't roll off), a really neat travel memory game from Amazon and many other things. I didn't put it all out at one time but rather offered something new when needed. 

The games have definitely become a staple in the car for trips or anywhere we have to sit and wait. Since I feel guilty every time I hand over my smart phone for our 6 year old to play games on I'm thinking magnetic tic tac toe would be great also especially when we are at a basketball or soccer game or even a track meet.

If you're planning a road trip I hope this comes in handy. It definitely helped us pass the miles. Do you have a different travel game idea? Something that worked great for your family? If so please share with the rest of us in the comments section.

Blessings,
Bridgette

Thursday, April 26, 2012

What Kind of Sewing Machine Do You Recommend?


What kind of sewing machine do you recommend? I get this question, or some form of it, at least once a week and I always give the same answer so I decided it was probably time to just put it on the blog for everyone to see and others to weigh in.




Of course there are many things to consider when purchasing a sewing machine, price and function being the top two. After you have decided how much you have to spend you need to know what you want your machine to do. Will you only be sewing? Are you hoping to do some machine appliqueing or embroidering? What about quilting? Maybe you already know exactly what you want, and even if you don't, now is a good time to visit your local sewing machine repair facility. This may be a sewing machine/vacuum repair shop or it may be at your favorite fabric store but it is always where I suggest people start and typically end their search for their machine. Here's why ...


First of all, I always, always, always suggest you buy something that can be repaired locally. Whether you're a sewing amateur making a few things for the kids now and then or a professional quilter making family heirlooms we all love our machines and I promise, you're not going to be happy when something breaks to begin with. If your machine has to be sent "away" for repair (wherever that is) you're going to be even more disappointed. In addition, typically when you buy from a local shop they offer a warranty for repair and chances are you will already know exactly who will be doing the service for you.


Second, check for trade ins. Many repair shops not only fix machines but they also sell new machines and chances are if they have new machines they have used trade-ins. This is a great way to get "more" machine for your budget. The used machines have been serviced, typically have warranties and often have bundles that can include accessories, hoops and even software at a discounted price. Find a shop that will let you trade in your trade in and you've struck gold.


Third, many repair shops offer ongoing support classes and even if they don't have formal classes they are almost always willing to sit down and show you how to do things. Let's face it, sewing machines have evolved like all other technology and they can be intimidating. Knowing that you have someone you can turn to for help is well worth it.


Whatever you do please don't be fooled by deep discounts at chain stores or celebrity endorsements. Support is the key and you won't get any from a national chain or a celebrity.  


Does all this mean that the only place to buy a machine is at a repair shop? No, of course not. Check estate sales and craigslist. Ask at the fabric shop if anyone is selling one. If you don't need the support you might find what you're looking for at a national chain store.  


Whatever you do ask lots of questions and be clear to those helping you about what you intend to use it for so they can guide you along the way.


Did I miss something? Do you have a tip, a lesson learned? Please feel free to share.   


Blessings,
Bridgette